- MICRO ( GEELY/HAFEI )
- LAND ROVER
- THREE WHEELER
- SUSPENSION PARTS
- ELECTRICAL PARTS
- VIC FILTERS
- VIC OIL FILTERS
- VIC FUEL FILTERS
- VIC AIR FILTERS
- VIC AC FILTERS (CABIN FILTERS)
- SAKURA FILTERS
- SAKURA OIL FILTERS
- SAKURA FUEL FILTERS
- SAKURA AIR FILTERS
- SAKURA AC (CABIN) FILTERS
- MK BRAKE PADS AND SHOES
- WIPER BLADES
- RECONDITION PARTS (USED PARTS)
Caliper Repair Kit for GEELY MICRO PANDA 1000CC / 1300CC / CROSS 1300CC
MK BRAKE PADS AND SHOES
Importance of Replacement for Brake Pad
Frictions material of brake pad is worn out with the use. Under the condition that friction material is worn more than prescribed, it may cause of reduction of braking because of rapid wear.
Also, these may lead to a damage to brake disc or brake drum.
Indication of Replacement for Brake Pad
The wear of brake pad is vary depending on braking of driver and driving condition. We recommend a inspection at the maintenance shop after 20,000km running.
When the remaining thickness of the pad becomes less than 5mm, the temperature of friction material is easy to rise and the brake pad wear quickly. Therefore, we recommend the replacement at the thickness of 5 mm.
Life of Brake Pad
If it is delayed replacing pads
|Contact between backing plate and brake disc because friction materials were completely worn out. Brake disc was also damaged.||Caliper where the thin pad is displaced from inside the bracket and scrapes against the brake disc to damage the yoke.|
These situations will cause the replacement of brake disc or a caliper and will take extra cost.
More importantly, it is very dangerous.
Read more and Copied from http://www.mkg.co.jp/global/en/product/handling.html